I just tried to use my digitmap from Obi 100 for Obi 202 and it is not working.
I used the same digitmap to set up service for my relative on the old Obi 100 without problems.
Does anyone know ?
Please post anything that's not Default and describe what occurs on the OBi202.
Expert configuration> ITSP profile C general> checkmarks removed from Obi and default settings at the digitmap>
deleted the Obi digitmap and replaced with following from my Obi 100 : *1571|<*1688>(<0(0>(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx)|<011:00>xx.)|*168800xx.|(Mipd)|[^*#]@@.'@'@@.)
and submitted.
Getting busy tone only while dialing out.
Quote from: carl on April 25, 2012, 10:00:40 AM
*1571|<*1688>(<0(0>(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx)|<011:00>xx.)|*168800xx.|(Mipd)|[^*#]@@.'@'@@.)
That DigitMap won't work in any OBi. It's missing the opening paren, <0(0> is not valid syntax, and even ignoring the missing opening paren, there is still mismatched parenthesis in the middle.
Please copy/paste the working DigitMap from the OBi100 so we can start with it.
(*1571|<*1688>(<00>(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx)|<011:00>xx.)|*168800xx.|(Mipd)|[^*#]@@.'@'@@.)
Quote from: carl on April 25, 2012, 10:49:19 AM
(*1571|<*1688>(<00>(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx)|<011:00>xx.)|*168800xx.|(Mipd)|[^*#]@@.'@'@@.)
That DigitMap is for Localphone and should work for Locaphone on an OBi202 as it did on an OBi100.
Please post the Call History entry for a failed call.
Actually, it is working now- sort of. Probably the mistake was that something happened to the copied and pasted string during the process. thanks.
Which does not mean that I am out of the woods because I stiil have one way audio on Obi 202 not only on Localphone, but also on the two GV accounts. I e-mailed the Obi customer service and hope that they come with some briliant idea. Nothing has changed, the gateway is in DMZ mode and the Obi 100 works without problems.