Recently after a power cycle I noticed that my OBI110 after power up starts flashing in green LED and after a few seconds it alternately flashes green and red. Does any boy know the reason or solution to this problem? as It does not come up at all.
Thanks,
I am having the same problem.. looks like no solution
Try hard reset via hole in the bottom (this will reset everything to factory settings). My OBi 202 went into reboot loop when I initially tried to configure it manually and this fixed it.
Quote from: farshad on May 13, 2012, 02:20:41 PMflashes green and red.
[It's too early for Christmas lights, but I *did* see just today that someone has already put up their Christmas Tree. However, I digress.]
Back to the real problem: JoeSchmoe007's advice is good advice! Resetting and then updating to latest firmware is your best bet.
Do let us know of your progress,
pc44