For most ppl who are not geek, even for me who work in IT but not in programming, writing a Digit Map or Route correctly is not a easy thing, and that's why a plenty of posts in this forum are about how to write Digit Maps or Routes.
Is there any possible to have a wizard integrated into the Device Configuration page in Dashboard, where user can input their intention in some combined inputboxes/dropboxes, and the wizard will be smart enough to create Digit Map and/or Route for users.
For example:
User input/select on Wizard page:
I want to add prefix <areacode> to <number>
I want <number>,<number>,<areacode>,<areacode> go to (sp2)[, <number>,<areacode> to to (sp3)][, and all others go to (sp1)]
I want incoming calls from trusted <number>,<number> to be able to call <number>,<areacode> via (sp2) as gateway
and so on
here, users still can use x, X, @, ., [], etc as a part of number or areacode, which is not too hard for users to understand.
I believe with help of this sort of wizard, OBi will be much more accepable, enjoyable, and easier to use by ppl and more successful.
Hi, I want all incoming call in a OBI200 SP1 (IP Telephone) to be transferred to another OBi200 attached phone. What are the things to setup?
Thanks.
Quote from: Shiblee on January 13, 2015, 07:06:57 AM
Thanks... ;D
I will use a OBi200 (1) as SP1 gateway. If I call from another OBi200 (2) how to ring at attached phone (of 1)?
azrobert wrote:
"This thread is for feature requests and not setup questions.
If you have more questions on this or other setups, please ask them under the "Installation and Setup" thread."