Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: Lavarock7 on July 08, 2012, 09:11:42 PM

Title: Multiple Inbound Accounts
Post by: Lavarock7 on July 08, 2012, 09:11:42 PM
I have a 202. I also have a number of SIP accounts (Sipgate, CC, UKDDI and so on) that I receive calls from and do not want to dial out through.

Can I configure them in the gateway section? I don't want to use up service provider slots when I am just receiving calls and not routing outbound calls through. If not, is there a better way to aggregate these lines through another service and send them all to one SIP connection in the 202?
Title: Re: Multiple Inbound Accounts
Post by: N7AS on July 08, 2012, 09:41:19 PM
Voice Gateways are for outbound only. You could forward these DIDs via SIP URI. I forward a number of my DIDs to my Anveo account via SIP URI.
Title: Re: Multiple Inbound Accounts
Post by: Stewart on July 09, 2012, 03:27:13 AM
Some providers, e.g. Localphone, Rebtel, VoxOx, who won't forward to a SIP URI, will forward to iNum at no cost.  You could then use a free iNum from Callcentric (or many others) to forward on to your OBi.
Text only | Text with Images