Print Page - How to configure Obi110 as a trunk in FreePBX

Title: How to configure Obi110 as a trunk in FreePBX
Post by: chivo on July 13, 2012, 01:46:27 PM

Hi there,

I want to know what is the correct configuration to register my obi as a trunk in FreePBX, so that I can place a call from my office's PBX, but my call will be going out using the SP2 on the Obi.

I tried to register my sp1 as an extension and my sp2 to voip.ms but the bridge is not working

Thanks,

Chivo

Title: Re: How to configure Obi110 as a trunk in FreePBX
Post by: QBZappy on July 13, 2012, 02:31:43 PM

chivo,

I think you need to look here:

Using the Obi 110 as an FXO and FXS Port for FreePBX
http://www.obitalk.com/forum/index.php?topic=1157.0

OBiTALK Community

General Support => Day-to-Day Use => Topic started by: chivo on July 13, 2012, 01:46:27 PM