I have a OBI100 that was configured and was working till yesterday. So Today I deleted it and am attempting to re-add it and have followed the instructions for Add a device but after I dial the **5.... number it times out and does not connect. I have tried this several times with different corded phones and cords. The green power light on the device is ON and the other two are off. Please help
With power on and internet and phone connected, try reseting the OBi to factory defaults by using a paperclip to hold the reset button accessible on the bottom (through the hole with a circle around it) depressed for at least 30 seconds. After releasing the reset button, give the OBi a couple of minutes to initialize. Then try adding using **5.
The OBi will lose all its configuration data, so will need providers etc setting up again. The **9222222222 test should work with no configuration.