hi,
I thought that we can use only the PSTN line for auto attendant to dial out using the #2 extension and the speed dial numbers. Do we need an extra line to accomplish this task?
ex: I call my aa from an outside line, I push #2 + speed-dial. Msg: no services available to complete the call.
ong83,
Calls made via the AA need a route to make the outgoing call.
You can set it up a number of different ways. Every approach ends up either using a properly configured trunk or you get the "no service available" message from the OBiMAN voice. Here a a few metods:
1) Set up the speed dial in a way where you hardcode the service (trunk) you want to force the call through.
**x5145551212 (**x could be 1=sp1, 2=sp2, 8=PSTN, 9=OBi)
2) Set up the AA to automatically chose a preselected trunk
Voice Services->Auto Attendant->Auto Attendant->PrimaryLine =(whatever)
Of course choose a trunk which is enabled and registered/connected with the voip service (or PSTN service) you entend to use to make the call with.
thanks, for the helpful explanation.
But I am still getting a no service message. I currently only setup pstn line. Maybe you can take a look at my configuration.
Setup Wizard >
Outbound Settings
Phone PrimaryLine: PSTN
Attendant PrimaryLine: PSTN
InBound Settings
POTS-line InboundCallRoute aa
Auto Attendant 1
PrimaryLine PSTN
Speed Dial #1:
**84155551212 (**8, local number)
I call number obi AA pickup. I push 21# and get no service. I am thinking when the pstn is called it cant transfer/forward to another number because AA is still active.
I basically want to do what you did: http://www.obitalk.com/forum/index.php?topic=1734.msg11140#msg11140
Quote from: ong83 on August 15, 2012, 09:29:50 PM
I currently only setup pstn line.
Do you see a problem here? It looks like you only have one trunk available to make calls. How do you expect to make a second call on the same trunk (line) if it is currently in use handling your first call? Did I understand your set up correctly?
Ahhh so many questions. :D
thanks, ;D rofl :o :o :o
I totally understand. I was just making sure if obi can like drop/pause the call and forward to another phone just using pstn.
I am going to add GV and post back the result and help for others.
cheers
Can someone verify my speed dials are correct format.
I really thought when I push #, it will cease the current call and dial out.
Sorry for asking. But is there a way to just use a single pstn, single GV for both incoming and outgoing calls?