I have the OBI110, google voice as main number and a pots line on the line port.
I want to be able to dial out on the Iphone app and use the line port **8, I have that working, BUT if I try to dial *7 or *5 it says invalid number.
I have a paging system on pots line I want to use. If I pick up any phone I can dial *7 or *5 to page or talk to whos at my door.
I want to use iPhone app. and dial **8 to use line port and dial *7 or *5
Any ideas ?
Thanks ......
Assuming you made changes to get the **8 working, then use the same method and go to:
Physical Interfaces > Line > Line Port > DigitMap
Default is this:
DigitMap (Mli)
(xxxxxxxS4|1xxxxxxxxxx|xx.)
Change to:
(*x|xxxxxxxS4|1xxxxxxxxxx|xx.)
This should allow * followed by any single digit to be dialled. From the iPhone **8*5 should work as the **8 gets removed before the *5 is sent to the Line Port.