OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: Eric-Berg on November 09, 2012, 02:53:29 PM

Title: Inbound Skype Call does not Disconnect
Post by: Eric-Berg on November 09, 2012, 02:53:29 PM
Newbie first timer. Just setup my first OBi100. Google Voice SP1 works perfect. Skype SP2 works except for one strange thing. I make out bound call fine and disconnect call from handset. But on inbound call if caller disconnects I get a dial tone. If I disconnect from handset the handset goes off but Skype still stays on call until user hangs up or I disconnect call on PC.

Do not know where problem is!

Is it OBi100 config or SIPtoSIS config?

SIPtoSIS say

2012-11-09 16:43:17,092 SIP RINGING
2012-11-09 16:43:20,848 SIP ACCEPTED/CALL
2012-11-09 16:43:21,850 Starting codec: PCMU/8000(0) rfc2833Type(101)
2012-11-09 16:43:21,851 RTP media target: 192.168.0.116:16808
2012-11-09 16:43:21,862 RtpSender Address locked.
2012-11-09 16:43:21,976 skypeCallStatus[294989] - INPROGRESS
2012-11-09 16:43:28,137 skypeCallStatus[294989] - Complete: FINISHED