Text only | Text with Images

OBiTALK Community

General Support => On-Topic: Obihai and OBi Products => Topic started by: tpir72 on December 17, 2012, 01:30:25 AM

Title: Ports to open in Router for OBI202?
Post by: tpir72 on December 17, 2012, 01:30:25 AM
Hi,
   Can you please tell me what ports to open in my Router for OBI202?

Regards,

Terry
Title: Re: Ports to open in Router for OBI202?
Post by: Rick on December 17, 2012, 03:46:11 AM
You should not have to make any ports open normally.
Title: Re: Ports to open in Router for OBI202?
Post by: tpir72 on December 17, 2012, 11:43:30 AM
OK Thanks,
    When I had two OOMA's there was an elaborate setup to make them work by opening ports in my router.

Regards,

Terry
Title: Re: Ports to open in Router for OBI202?
Post by: OBiSupport on December 17, 2012, 02:59:39 PM
Please see this FAQ:

http://www.obihai.com/FAQ.html#ports-to-keep-open-on-my-router

Thank you.
Obihai Technology, Inc.
Title: Re: Ports to open in Router for OBI202?
Post by: giqcass on December 17, 2012, 04:34:41 PM
With the 202 you can put the Obi on the outside of your network.  Then it can worry about QOS and you don't need to worry about ports.  I put my router in DMZ on the OBI to allow me to access it from the outside without problems.

internet<>OBI<>Router(DMZ)<>Everything else hooks to router.
Title: Re: Ports to open in Router for OBI202?
Post by: rsnyc on December 28, 2012, 07:34:42 AM
Quote from: giqcass on December 17, 2012, 04:34:41 PM
With the 202 you can put the Obi on the outside of your network.  Then it can worry about QOS and you don't need to worry about ports.  I put my router in DMZ on the OBI to allow me to access it from the outside without problems.

internet<>OBI<>Router(DMZ)<>Everything else hooks to router.

so do you mean that you hook your modem into the obi and then connect obi to the router? currently i have everything hooked into my router and router to pc and am experiencing choppy calls.
Text only | Text with Images