Title: How to configure SIP for Anveo E911?
Post by: Peg_M on December 27, 2012, 06:08:09 AM
Post by: Peg_M on December 27, 2012, 06:08:09 AM
I am using Google Voice with OBI202 and have signed up for E911 with Anveo.
Anveo says I must configure my SIP/ATA device to connect to Anveo. Anveo says the easiest way to do this is via OBI Talk.
But I can't figure out how. Please help. Peg M
Anveo says I must configure my SIP/ATA device to connect to Anveo. Anveo says the easiest way to do this is via OBI Talk.
But I can't figure out how. Please help. Peg M
Title: Re: How to configure SIP for Anveo E911?
Post by: MikeHObi on December 29, 2012, 06:12:47 PM
Post by: MikeHObi on December 29, 2012, 06:12:47 PM
Use obitalk to configure your connections.
Click on your obi to see it's currently configured ports.
Pick the port you will use for Anveo and edit it.
When you configure E911 and get your account at Anveo, they give you some details for your sip connection
Take those details to your obi port configuration and fill in the proper boxes, and check the box for using it as your E911 source.
That's it.
Click on your obi to see it's currently configured ports.
Pick the port you will use for Anveo and edit it.
When you configure E911 and get your account at Anveo, they give you some details for your sip connection
Take those details to your obi port configuration and fill in the proper boxes, and check the box for using it as your E911 source.
That's it.