I just received an obi 202 and tried to install following the quick start guide. I am unable to make even the obitalk test call. The power light is solid green. the light is flashing green on the internet ethernet port. there is no light when i plug in my phone. (indicating the 'port is not enabled' ) What am I missing? Please help!
The light indicates if the port is available (configured/assigned). It does not know if a phone is plugged in.
Are you using the Portal or Web interface for setup? Do not use the web interface if you started configuration on the portal.
Just in case, although the front of the 202 shows Phone1 & Phone 2 going from left to Right, if you turn the unit around, the ports are reversed (but labeled).