OBiTALK Community

General Support => Feature Requests => Topic started by: Dutchbiy on January 21, 2013, 05:12:07 PM

Title: Additional Distinctive Ring
Post by: Dutchbiy on January 21, 2013, 05:12:07 PM
It would be helpful to have at least 3 distinctive rings.  A,B & C.

If and when two Bluetooth adapters are supported.  It would be helpful for another distinctive ring to differentiate an incoming call from either of two paired cell phones.
Title: Re: Additional Distinctive Ring
Post by: giqcass on January 25, 2013, 03:13:08 PM
There are 10 ring patters.  There are only 2 ring profiles but you can pick from all 10 ring patterns within each profile.  You could even create a new ring pattern if you know how. I currently only use profile A but on my other line I set X_DefaultRing 6 so I can differentiate.  If you got creative you could have 20 ring patterns total.
Title: Re: Additional Distinctive Ring
Post by: CoalMinerRetired on January 25, 2013, 06:33:58 PM
It's wide open as to creating custom ring patterns (sometimes called ring cadence). The syntax is explained here (http://www.obihai.com/OBiAdminGuide.htm#_Toc333506142). 

I've experimented with it quite a lot when I first got an Obi202. Two caveats from what I picked up: Whatever pattern you create you have to account for delivery of the Caller ID signals to your analog phone set, and the ringers in analog handsets may not respond as expected when you set the time increments down to the 0.1 (one tenth) of a second range. Some more insights here, #2 (http://www.obitalk.com/forum/index.php?topic=4938.msg31929#msg31929).
Title: Re: Additional Distinctive Ring
Post by: giqcass on January 26, 2013, 01:10:57 PM
You know it would be and interesting project to make a ring pattern simulator or a ring pattern sharing thread.
Title: Re: Additional Distinctive Ring
Post by: Dutchbiy on February 06, 2013, 06:07:41 PM
I apologize for not being clear.  I was requesting 3 ring profiles when / if  2 Bluetooth adapters are supported so 2 cell phones would have a unique distinctive ring as well as the standard ring for the wired lines connected to the TA
Title: Re: Additional Distinctive Ring
Post by: CoalMinerRetired on February 06, 2013, 06:27:46 PM
Quote from: giqcass on January 26, 2013, 01:10:57 PM
You know it would be and interesting project to make a ring pattern simulator or a ring pattern sharing thread.
Add your name to the existing feature request: http://www.obitalk.com/forum/index.php?topic=1547.0

Some observations that surprised me when experimenting with ring patterns: http://www.obitalk.com/forum/index.php?topic=4938.msg31929#msg31929

If you search for "cadence" instead of 'ring pattern' on here you'll get some insightful posts.