Hello,
I have SP1 (GV) set up as your Primary Line to Call Out. This means that when you dial normally from the attached phone (e.g. 1-212-555-1234) the call will use Google's service.
I want to make International call through SP2 (Vopium). If i need to place a call from SP2 then i have dial **2 before the destination number, e.g. **2 011 44 4200 3456.
I want to avoid having to remember to dial **2. How can i change the OBi Digit Map / Outbound Call Rout parameters.
Thanks,
Venky
Add the following to the beginning of the Phone OutboundCallRoute:
{(011xx.):sp2},
Hi,
I am pretty new to this.
Can you please tell me how do i add?
If you can give me the steps, that would be helpful.
Thanks,
Venky
Following is what i currently have in the Phone OutboundCallRoute.
{([1-9]x?*(Mpli)):pp},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Where should i add your statement?
Please guide.
Thanks,
Venky
{(011xx.):sp2},{([1-9]x?*(Mpli)):pp},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}
I am trying to force a specific call to go to SP1. I have tried {(9991234567):sp1} & {(9991234567.):sp1} where 9991234567 is the area code and phone number and I can't seem to accomplish. Any assistance would be appreciated.
Quote from: Dutchbiy on February 18, 2013, 08:24:59 PM
I am trying to force a specific call to go to SP1. I have tried {(9991234567):sp1} & {(9991234567.):sp1} where 9991234567 is the area code and phone number and I can't seem to accomplish. Any assistance would be appreciated.
Placing {(9991234567):sp1}, at the beginning of your Phone Port OutboundCallRoute should do it.
What's happening when you dial the number?
You can verify what is happening at Status => Call History.