Text only | Text with Images

OBiTALK Community

Region Specific Technical / Service Provider Support => Australia, New Zealand and the Pacific Islands => Topic started by: JohnGee on February 03, 2013, 01:30:16 AM

Title: Trying to setup OBi110 with MyNetFone
Post by: JohnGee on February 03, 2013, 01:30:16 AM
Whatever I try, it has not worked yet.

I have posted some info on a web page if you are interested or have an Obi working with MNF.

see http://4netsil.com/obi-mnf/

I hope I can get this working.

As per my web posting, maybe you can spot something I have set wrongly, or have some other pearl of wisdom.

Thanks

JohnGee
Title: Re: Trying to setup OBi110 with MyNetFone
Post by: JohnGee on February 04, 2013, 12:43:27 AM
OBi110 will not work with MyNetFone. 1.3.0 (Build: 2776)

See this message....
http://www.obitalk.com/forum/index.php?topic=5172.msg33702#msg33702 (http://www.obitalk.com/forum/index.php?topic=5172.msg33702#msg33702)

JohnGee
Title: Re: Trying to setup OBi110 with MyNetFone
Post by: JohnGee on February 05, 2013, 11:21:08 PM
Problem solved.

Reading how others did have MNF and OBi110 working I began to look at the Telstra supplied ADSL modem. A Technicolor TG587n V3. Looking around the Aussie whirlpool forum, users suggested it was a piece of kr@p and had some 'locked-by' Telstra features.
I tried the various tips using telnet to get to those features but to no avail. Could not find a setting to disable ALG.

I bit the bullet and went and bought a Billion 7800n and once I connected to the Bigpond ADSL2 and rebooted the OBi110, everything began to work as expected.

JohnGee    ;D ;D ;D ;D
Text only | Text with Images