Print Page - Obi100 w/dual phone jack

Title: Obi100 w/dual phone jack
Post by: rfgenerator on March 29, 2011, 10:06:44 AM

Hi folks,
Seeing as the availability of the Obi110 is very limited I have ordered an Obi100, Will I be able to use a RJ11 dual jack to feed both a phone attached to the Obi100 and the house phone wiring? This is the type of jack I'm talking about http://www.amazon.com/Belkin-RJ11-2-RJ11-Modular-Adapter/dp/B00004Z5KI
Thanks,

Title: Re: Obi100 w/dual phone jack
Post by: RonR on March 29, 2011, 10:14:46 AM

Yes, that should work. Just make sure your house phone wiring has been disconnected from any other telephone network or equipment.

Title: Re: Obi100 w/dual phone jack
Post by: MichiganTelephone on March 29, 2011, 12:12:23 PM

You might want to visit this page:

How to Distribute VoIP Throughout a Home (http://mi-telecom.org/distribute.html)

Everything you could possibly want to know on the subject (I hope) and then some. ;D

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: rfgenerator on March 29, 2011, 10:06:44 AM