While OBi Expert Configuration allows detailed configuration, can the call status and call history be also visible at OBi web portal?
This may be useful if you are remote site but want to check the status as well
ckleea,
Hi,
It will be possible to enter the OBi device directly over the internet if you do port forwarding on the router. I would change the default OBi port number to something else. This way you could check your calls and even configure the unit.
Example: http://ckleea.getmyip.com:85
Quote from: QBZappy on April 07, 2011, 11:15:01 PM
ckleea,
Hi,
I will be possible to enter the OBi device directly over the internet if you do port forwarding on the router. I would change the default OBi port number to something else. This way you could check your calls and even configure the unit.
Example: http://ckleea.getmyip.com:85
I do have this but from time to time, some sites e.g. office may have outbound restriction that limit the port to be used. For a portal, it uses port 80 and hence will work everywhere.
CK
Quote from: ckleea on April 07, 2011, 08:53:31 PM
While OBi Expert Configuration allows detailed configuration, can the call status and call history be also visible at OBi web portal?
This may be useful if you are remote site but want to check the status as well
+++++
This would be a valuable tool to allow remote troubleshooting for failed calls, call syntax, digit map parsing, etc.
If a 200 history is too much for the Web Portal, perhaps the last 5, 10, or 20 calls??? Pleeeeeeeese.