this probably asked many times, i couldn't figure out as a newbie.
this is what i have done by googling, all settings are done in obitalk.com
1)set up sp1 to my gv, seems working
2)set up sp2 to nonoh.net, status shows registered.
questions:
1. I setup sp1 as primary, so by default it is using this line. how do I make calls using sp2?
2. is it possible to setup so that all international calls start with 011 by default use sp2, while other calls using sp1? if you could provide some detailed samples or point me to step by step guide, that's will be great.
thanks!
Here is a list of some threads that may be helpful, but I have not analyzed each:
http://www.obitalk.com/forum/index.php?topic=3341.0
http://www.obitalk.com/forum/index.php?topic=2915.0
http://www.obitalk.com/forum/index.php?topic=5428.0
http://www.obitalk.com/forum/index.php?topic=6100.0
http://www.obitalk.com/forum/index.php?topic=5630.0
http://www.obitalk.com/forum/index.php?topic=4743.0
http://www.obitalk.com/forum/index.php?topic=3644.0
http://www.obitalk.com/forum/index.php?topic=4034.0
Thanks!