I've installed an Obi110 with GV and after a few missteps the basics are in place and working well. Now is the time for me to find out exactly how to use some of the features.
I've read quite a bit about the Obi features, but couldn't find specific examples of what I want to do. Maybe I'm not reading the correct documents.
For example: Speed Dialing:
I see in the star code chart I set the speed dial number using *74(SDnumber)dial number and I can verify the speed dial number contents by using *75.
But I didn't see how to make a call using speed dial. I finally found it in one of these forums. Just use (SDnumber) followed by a '#'.
What documents should I be reading to find things like this out?
Thanks,
Tazer98
You can find this in admin guide:
Speed Dial Numbers
Each OBi device supports 99 speed dial numbers. The 99 speed dial slots are numbered from 1 to 99 and are invoked by dialing a 1 or 2-digit number corresponding to the slot number. Speed dials may be dialed from the PHONE Port or via the Auto Attendant. Note that the 2-digit numbers "01", "02", ..., "09" are not admissible; you must dial the 1-digit number "1", "2", ..., "9" for slot number 1-9.
Try this link,
http://www.obihai.com/docs-downloads.html