Print Page - Obi110 line in ring delay

Title: Obi110 line in ring delay
Post by: voip4me on September 29, 2013, 11:28:41 PM

Hello all,

I have an obi110 on which I need the line in port to start ringing on the first ring. What I mean is I want to bypass the dealy for caller ID and have the connected phone ring on the first ring. The pots line in is from a AT&T adapter and has no caller ID only the number. Please let me know what settings I need to change.

Thanks for your time.

Title: Re: Obi110 line in ring delay
Post by: ianobi on September 30, 2013, 03:37:41 AM

Change to this setting:

Physical Interfaces > LINE Port > RingDelay: 0

To make the changes select your Obi in Obi Dashboard, then Obi Expert Configuration, then Enter Obi Expert. In each case where you want to change a value, first uncheck both the boxes to the right of that value and leave them unchecked. When you have finished making changes, press submit and wait a few minutes for the Obi to reboot.

Title: Re: Obi110 line in ring delay
Post by: voip4me on September 30, 2013, 10:57:34 PM

Thank you, I will give it a try and let you know.

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: voip4me on September 29, 2013, 11:28:41 PM