OBiTALK Service Settings
TryMultiplePorts
Controlling my far away OBi unit via the OBiTALK portal is sometimes not possible because for some reason it looses connection to the portal and I get an amber light on the portal.
The above mentioned setting should be available on the OBiTALK portal. At the moment it is only accessible via the local OBi unit web page. I think this setting is meant to facilitate the far away OBi unit to be connected to the OBiTALK portal by using alternate port numbers on the OBiTALK service. Hopefully having the ability to put a check mark in this setting will allow the units to be "green" on the OBiTALK portal. Not having this control in the portal defeats the point of having this feature.
Except for those times when the failure is due to the Obihai portal being down. ;)