Obihai Support,
Could we get an update on the following outstanding/uncorrected problems? Have these problems been solved and when might we see an updated firmware to correct them?
1. Some Star Code features require a reboot to be effective and utilize an undocumented trunk name of GT1/GT2 instead of SP1/SP2.
2. # characters in DigitMaps do not work correctly without removing the Logical FXS to FXO Relay feature rule: {(<#:>):li}
3. ***8 is not IVR Password protected. Dialing ***81 will immediately return the OBi to factory defaults.
4. IVR ignores the first command that requires an IVR password be entered.
Thank you for your patience, we are working on these issues.
Fixes will be in next firmware release.
-Obihai Support Team
Any idea when we might might expect the next firmware release to fix the bugs listed in the first post?
Another two weeks have elapsed.
Setting a forwarding number is a real pain:
Dial *62 + number + # // This should be all that's required, but...
Dial *** // Enter IVR
Dial 9 // Request a reboot
Dial PIN // Enter IVR PIN
Dial 9 // Request a reboot again as it was discarded when a PIN was required
Dial 1 // Confirm reboot
and the same thing to disable a forwarding number:
Dial *63 // This should be all that's required, but...
Dial *** // Enter IVR
Dial 9 // Request a reboot
Dial PIN // Enter IVR PIN
Dial 9 // Request a reboot again as it was discarded when a PIN was required
Dial 1 // Confirm reboot
Release 1.2.1(2283) has been posted.
Your items 1-3 have been fixed. Thank you.