Print Page - swap sp1 with sp2?

Title: swap sp1 with sp2?
Post by: synchron on February 09, 2014, 02:04:34 PM

I have SP1 set up with Google voice (XMPP) and SP2 set up with Sipsorcery (GV webcallback). I'd like to easily switch it so that the Sipsorcery default dial out number doesn't need any '**' prefix and to use the GV XMPP you need to use the ** prefix.

Or better yet, if I just check the 'Primary Line for Outgoing Calls' appropriately, can I get SP2 to not use '**' and SP1 will need to use '**1' as a prefix (until 5/14 when XMPP dies.)??

Thanks.

Title: Re: swap sp1 with sp2?
Post by: gderf on February 09, 2014, 02:25:18 PM

Set Primary Line for Outgoing Calls on the SP of your choice.

Title: Re: swap sp1 with sp2?
Post by: azrobert on February 09, 2014, 02:26:24 PM

Go to Physical Interfaces -> Phone Port
Change Primary Line from "SP1 Service" to "SP2 Service".

Title: Re: swap sp1 with sp2?
Post by: synchron on February 10, 2014, 11:02:41 AM

Thanks~ 8)

OBiTALK Community

General Support => Day-to-Day Use => Topic started by: synchron on February 09, 2014, 02:04:34 PM