I have an Obi110 with sp1 as my primary line. I just had my number ported to Anveo and everything works except for accessing voicemail. Voicemail is directly accessed with *99 but I just get a busy signal. I think it has to do with the digimap on the phone port. The digimap is {([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
What do I add to allow *99 to go directly through sp1? My guess was to add {*99:sp1} but it didn't work.
Are there any documents that do a better job of explaining digimaps then the administrators guide?
Thanks
Try adding *99 to the ITSP A DigitMap
This is the default ITSP A DigitMap with *99 added:
(*99|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
You don't need to change the Phone Port OutboundCallRoute.
You called it the digimap.
For an explanation see my reply here:
http://www.obitalk.com/forum/index.php?topic=7344.0