Print Page - How to switch ring types from SP1 to SP2

Title: How to switch ring types from SP1 to SP2
Post by: kealolo on April 22, 2014, 02:33:04 PM

Hi... I currently have GV on SP1 and the new PhonePower deal on SP2.

I'd like to switch it so that the phonepower number gives the single ring and GV gives the double ring.

Is there any easier way to do that than deleting them both and starting over? I hate to do that. I thought there was supposed to be someplace I could simply swap and A and B ringer modes, but in the expert configuration those choices seemed greyed out.

Thanks for any advice, gang...

Title: Re: How to switch ring types from SP1 to SP2
Post by: Taoman on April 22, 2014, 02:51:23 PM

You need to uncheck both boxes to the right of the fields you are trying to edit.

http://www.obitalk.com/forum/index.php?topic=7677.msg49469#msg49469 (http://www.obitalk.com/forum/index.php?topic=7677.msg49469#msg49469)

Title: Re: How to switch ring types from SP1 to SP2
Post by: kealolo on April 24, 2014, 02:48:10 PM

Hi, that seems to work, but it did leave a number of red exclamation points in the "obi expert" configurations.

Usually red exclamation marks aren't a good thing. Is there a potential problem with doing this change?

thanks

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: kealolo on April 22, 2014, 02:33:04 PM