Print Page - Rule to route all Int'l to SP1

Title: Rule to route all Int'l to SP1
Post by: ddalva on May 05, 2011, 08:10:38 AM

I would like all US calls (+1...) to go through the LINE.
I would like all Int'l calls (011...) to go through SP1 where I have GV set up.

How do I do this?

Dave

Title: Re: Rule to route all Int'l to SP1
Post by: RonR on May 05, 2011, 08:59:23 AM

Physical Interfaces -> PHONE Port -> PrimaryLine -> PSTN Line

Physical Interfaces -> LINE Port -> DigitMap :

(xxxxxxxS4|<1>[2-9]xxxxxxxxxS0|1xxxxxxxxxxS0|xx.|<**1>011xx.)

7-, 10-, and 11-digit calls should go out the LINE Port and 011 + country code + number calls should go out SP1.

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: ddalva on May 05, 2011, 08:10:38 AM