Hello,
I've recently set up an OBI 100 and am using it with google voice. I tried to set up speed dial using the "star" codes but am unable to do so. When I dial "*74" it plays the SIT and says "the number you dialled *74 was rejected by the service provider. Reason is 404"
Interestingly, *75 & 76 appear to work *75 of course just says that the "value is unavailable." but as nothing has been configured this is not surprising. Setting speed dials.
I assume that this means that somehow, the OBI is incorrectly passing *74 out as if it were a phone number. "Star Code Profile" shows the 74 is set to the correct "default" value.
Don't see anything else in the forum similar to this or in the manual.
— Thanks,
A noob.
Are you dialing anything AFTER the *74?
The Obi expects a speed dial number, etc
From the technical manual:
*74 Speed Dial Set-Up (Enter SD No. [1-99] then Tel No. + #)
as in *74 55 21225551212#
*752# or *752 and waiting a few seconds would read back the value for Speed Dial 2
This is how to set speed dial 10 to 1234567
Dial *7410#
Wait for tone
Dial 1234567#
You need the pause because without it the above could be interpreted as setting speed dial 1 to 01234567
Edit:
What are you trying to do?
Ok, thanks. Here's what happened. After dialling *74 I expected a confirmation tone to enter the SD number then the phone no. (That is to say, I expected to dial *74 (wait for tone) 10 (wait for new tone) 6465551212.
Thanks.