Print Page - Trying to change Primary Line

Title: Trying to change Primary Line - does not save
Post by: joelones on November 21, 2014, 08:29:50 AM

Hello,

I have an OBI200 and have GV on SP1. I have anothe provider on SP3 that I'd like to make a Primary Line.

If I set to it accordingly in Physical Interface > Phone1 Port >Primary Line, it always defaults to SP1 when I reboot thus the setting never sticks.

Please help.

Thanks

Title: Re: Trying to change Primary Line - does not save
Post by: azrobert on November 21, 2014, 09:00:37 AM

If you are using the local interface to configure your OBI and not OBiTalk you must disable auto-provisioning.

System Management -> Auto Provisioning
Under OBiTalk Provisioning
Method: Disabled

Title: Re: Trying to change Primary Line - does not save
Post by: joelones on November 21, 2014, 01:05:04 PM

Quote from: azrobert on November 21, 2014, 09:00:37 AM
If you are using the local interface to configure your OBI and not OBiTalk you must disable auto-provisioning.

System Management -> Auto Provisioning
Under OBiTalk Provisioning
Method: Disabled

Yes, that worked. Thanks.

Title: Re: Trying to change Primary Line - does not save
Post by: drgeoff on November 21, 2014, 03:42:22 PM

The old #1 Beginners' Gotcha strikes again. :)

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: joelones on November 21, 2014, 08:29:50 AM