OBiTALK Community

General Support => Day-to-Day Use => Topic started by: ceg3 on January 03, 2015, 10:00:16 AM

Title: Anveo 933 Test
Post by: ceg3 on January 03, 2015, 10:00:16 AM
Anybody else getting odd behavior when testing E911 for Anveo by dialing 933?  Unless they have truncated the system I'm not hearing the male voice announcing the test and latency is off the chart and hangs up on its own accord after one or two very delayed echoes.
Title: Re: Anveo 933 Test
Post by: ColoradoVOIP on January 03, 2015, 08:02:20 PM
Confirmed.
The guy who normally talks and confirms setup is missing. I just get the lady who reads my address back.

I would report it to Anveo, but you know... support isn't free.
Title: Re: Anveo 933 Test
Post by: ceg3 on January 04, 2015, 07:04:53 AM
I used the feedback option to report this to Anveo.
Title: Re: Anveo 933 Test
Post by: ceg3 on January 05, 2015, 11:33:32 AM
Just checked it again during what should office hours for Anveo and the test is running normally.
Title: Re: Anveo 933 Test
Post by: ColoradoVOIP on January 05, 2015, 06:38:32 PM
Awesome! Working for me again too. Thanks for reporting that!

;D ;D