Text only | Text with Images

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: Purplelaser on May 27, 2011, 09:51:56 AM

Title: Ipkall to IP address No Audio
Post by: Purplelaser on May 27, 2011, 09:51:56 AM
I configured Ipkall to ring in to Obi as IP address:5060 . Obi phone rings and shows caller ID but when I pick up there is no audio incoming or outgoing. My SP1 provider is FreeCall, a SIP provider and works properly on outgoing. I tried my DNS server with Ipkall---- same audio problem. Ipkall forwarded to freeCall itself has audio. DMZ option in router did not help or changing ALG setting. All codecs are active in profile A.
Title: Re: Ipkall to IP address No Audio
Post by: Purplelaser on June 04, 2011, 02:46:56 PM
Problem solved. I now use IPCOMMS for incoming DID. I use a DDNS server and returned the router to ALG-yes in advanced firewall settings.
Title: Re: Ipkall to IP address No Audio
Post by: RonR on June 04, 2011, 02:49:57 PM
IPCOMMS is a much better choice than IPKALL.  I'm pleased to hear everything is coming together for you.
Title: Re: Ipkall to IP address No Audio
Post by: westec22 on September 18, 2011, 10:06:51 AM
I have the same problem.  I switched from a Cisco VOIP box which worked fine to the OBI110 which now has this problem.  I have callwithus + IPKALL.  If I go back to the Cisco, everything works fine.  Any ideas?  I don't want to give up on this... on the other hand, I don't want to get a new phone number just for this device.

Thanks!!!
Text only | Text with Images