Print Page - How to add a pause in one-stage dialling?

Title: How to add a pause in one-stage dialling?
Post by: yhfung on June 03, 2011, 08:50:08 PM

Hi Obi Users,

Suppose the speed-dial number of the remote unit is 2 and the LINE Port is connected to an extension line of a PABX. Press number 9 to get access to the external telco line.

The usual sequence is 2*9 xxxx yyyy, where 9 is to access the external telco line of the PABX and xxxx yyyy is the PSTN number that I want.

Is there any means to put a pause in between the digit 9 and xxxx yyyy?

YH

Title: Re: How to add a pause in one-stage dialling?
Post by: QBZappy on June 04, 2011, 07:04:33 AM

YH,

Hi, try adding w or S after the 9. I think it might work.

OBiTALK Community

General Support => Day-to-Day Use => Topic started by: yhfung on June 03, 2011, 08:50:08 PM