Quote from: glnz9 on April 15, 2020, 06:49:23 AM
Is there any trick to getting a SINGLE voip.ms or gv911.com account to service both setups with only a single monthly charge?
Easily done either way. For
VoIP.ms, you must first purchase a
VoIP.ms DID. You then activate/enable E911 for that DID. For the second OBi, you would just create a subaccount in the
VoIP.ms portal and use the SIP credentials from that to register your second OBi to
VoIP.ms. Any 911 call from either OBi would/must display the same
VoIP.ms DID phone number as the outgoing CID.
GV911.com is entirely different. You don't register your OBi devices to
gv911.com so you don't configure SP2 like you would with
VoIP.ms. It's a simple redirect (configuration change on your OBi) of a 911 call to a number they provide. You add all your info into the gv911 database (name, address, phone number, etc) and they provide you with a number to configure in your OutboundCallRoute. An example of how this is done is in the link below.
So any 911 call on either OBi would go out on their own individual GV lines but to the same GV911 phone number.
(
Edit: I just realized this probably wouldn't work because your outbound CIDs would be different and GV911 wouldn't recognize the second GV CID.)
http://www.obitalk.com/forum/index.php?topic=1607.0What I don't know is how the back end works with GV911. Once the 911 call gets redirected to the GV911 provided number then what happens? How exactly does the call get to the correct PSAP?
Disclaimer: I don't subscribe to
GV911.com so I'm just assuming that's how things work based on what I've read. If someone knows better please correct me.