I have an Obi202
It has 3 Google Voice accounts configured and one trunk to my asterisk.
SP1 is GV1 my primary GV line (area code 503 Oregon)
I make calls from asterisk and use SP1 on Obi 202 as a Go - between GV/asterisk. Port 1 works as a back up for inbound/outbound calls if asterisk should fail or I need to make major changes. SP4 is the connection to asterisk
SP2 is GV2 My Dedicated GV Fax line
Fax Machine is connected to Port 2 and is a dedicated fax line using Obi202 port 2
SP3 is GV3 My second GV Voice Line (area Code 360 Washington)
I have Port1 configured to automatically use this account when dialing into Area Code 360, while all other calls made on port 1 use SP1. I would like this to be available to asterisk when dialing 360 area code numbers.
SP4 dedicated 2 way trunk to asterisk (IP Auth)
What I have tried:
I have tried adding the following to dial plan on SP1 and SP4 which works for calls made from Phone Port1 , but not calls that come in to SP4 account from asterisk.
|<**3>1360xxxxxxx|<**31>360xxxxxxx|
I have also tried sending the dial string from asterisk **31360xxxxxxx (this should dial **3 to select port 3 then the number 1 360 xxx xxxx on the selected port.
I can do this from a phone on port 1 but not from asterisk
I would imagine that there is something I am missing.
I can see that asterisk properly sends the call.
Any ideas?
Thanks