Hello,
I can't seem to place any outbound SIP URI calls. They don't connect.
All of my regular calls work fine.
SP3=
voip.msSpeed Dials
3. sp3(thetestcall@sip2sip.info)
When I dial 3#, I just get dead air.
Terminal ID PHONE1 SP3
State trying calling
Peer Name
Peer Number sp3(thetestcall@sip2sip.info)
thetestcall@sip2sip.infoStart Time 12:56:58 12:56:58
Duration 00:00:08 00:00:08
Direction Outbound Outbound
Peer RTP Address 0.0.0.0:0
Local RTP Address 192.xx.xx.x:17004
RTP Transport UDP
Audio Codec tx=; rx=
RTP Packetization (ms) tx=0; rx=0
RTP Packet Count tx=0; rx=0
RTP Byte Count tx=0; rx=0
I also tried SP1, which is another SIP Provider. No difference.
I just hear dead air. Any ideas?