Hi,There is some time since we have those problems(two Obi110 in Romania and one in Australia)
The obihai is exchanging e-mails with me trying to fix that.
I put the coppy of my last email send to them in weekend,maybe helps finding a common culprit of that.
>>>>>
Hi
1.I did,even I took out the AU Obi line, still happening .
2.LINE port have been used for most of the time just on the Romanian obis
3.For now I don't change firmware living it as t he last resort to try
4.Calling local numbers -not distorsions,I called different combination ,From mobil-short call to Obi-Sp1-call back tru **8 xx-mobil-call other number again tru Sp1 -everything ok
5.Is nothing to do with the complexity of the call,the basic scenario which trigger the problem is Phone Obi Au-Obi(s)Ro-Line out.
After i do the first call as above,the first call from Ro mobile-ObiRO-ObiAU-phone/or callout has:
a)on Romanian obi distorsions on AA and
b) call droping,distorsion and reduction of volume ,most of the time he can notice that after hearing a noise like a ,,cling" and that happening variabil in time on each call but never ccome back to normal during the call.
c)From that on doesn't matter which one is calling the problems persist till all Obis are reboot
!!! If is only Romanian party calling Australia we didn't notice to happen,this is probably why we thought ,,sometimes they works fine for a period of time"
It is a strange behavior ,hope that helps to ,,eradicate" the problem!
Have Nice Weekend!
from the bottom of the.....Globe
Paul Costea