Indeed, it appears the web portal is overriding the manual checkbox for Default for the OutboundCallRoute attribute. As you say, when I went back in there now, the Default box for OutboundCallRoute is unchecked. Here is the string that is in there now before I re-check it:
---
{911:sp1},{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
---
Ok, I disabled the Auto Provisioning attribute under System Management as you suggested and and went into the Phone Port menu under Physical Interfaces and re-checked the box under Default for the OutboundCallRoute attribute and "Submit"ted the changes and rebooted the Obi110. Guess what, the System MAnagement attribute has been changed to Disabled, however when I go into Phone Port under Physical Interfaces, its been over-ridded again and the box under Default for the attribute OutboundCallRoute is again unchecked!! It appears, disabling the Auto Provisioning attribute under System Management doesn't seem to prevent the device from being over-written by the portal. Very strange.
Any more suggestions or things to try?
Thx
robbie