Needhelp,
You can configure the OBi using the OBiTALK Web Portal:
OBi Expert Configuration (Introduction)OR
directly by logging into the OBi at the IP address returned by dialing ***1.
Once you log into the OBi, you wll find a navigation tree on the left side. After making any changes, you must press the Submit button at the bottom of the page before leaving that page. Once you made all desired changes, you must press the Reboot button in the upper right corner for your changes to take effect.
If you elect to make changes directly, you must disable Auto Provisioning:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method: Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method: Disabled
I find the OBiTALK Web Portal takes considerably more time and effort to use compared to direct access. I use direct access exclusively.