Argh! My device was working fine until my wireless modem became disconnected. Since, I cannot get it to work.
I deleted the device from Obitalk dashboard, and now I cannot add it again. It gives me a phone number to call (**5 and 4 digits), I call, get the recording that the number has been sent to the server...then...nothing. It just times out.
Trying to make a call gives me the recording that "there is no service".
I have reset the unit using the reset button on the underside.
I went to the ip address and followed all the instructions I found here for adding the device. Nada.
Quote from: RonR on November 10, 2011, 07:10:12 PM
It's easier and faster to configure the OBi without using the OBiTALK Web Portal.
Simply log into the OBi at the IP address returned by dialing ***1 using admin/admin.
Then set:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
Google Voice on SP1:
Service Providers -> ITSP Profile A -> General -> Name : Google Voice
Service Providers -> ITSP Profile A -> General -> SignalingProtocol : Google Voice
Voice Services -> SP1 Service -> AuthUserName : (Google Voice username)
Voice Services -> SP1 Service -> AuthPassword : (Google Voice password)
Voice Services -> SP1 Service -> X_SkipCallScreening : (checked)
Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service
Also, now the admin/admin password does not work.
My power light on the unit is lit, the internet light blinks, and the phone led and the one next to it are out.
Can someone please help me? Thanks!