Quote from: ianobi on December 21, 2012, 03:41:38 AM
Larva, welcome to the forum.
You need to make a few changes via the Obi Expert Configuration pages. From your OBi Dashboard, click on your OBi number and follow the prompts to get there. To change a value uncheck both boxes to the right of the value and leave them unchecked. After changing the values on one page, press submit at the bottom of the page and wait a few minutes for the Obi to reboot. Then move on to the next page if required.
Exact DigitMaps will depend on exactly what you need to dial for local numbers etc. I will make an "educated guess". I'm assuming that you set up Google Voice on SP1 Service. This is how your configuration needs to look
Physical Interfaces -> PHONE Port -> PrimaryLine: PSTN Line
Voice Service -> Auto Attendant -> PrimaryLine: PSTN Line
Physical Interfaces -> LINE Port -> DigitMap :
(<**1>011xx.|xxxxxxxS4|[2-9]xxxxxxxxxS0|1xxxxxxxxxxS0|xx.)
Service Providers -> ITSP Profile A -> General -> DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.)
With no ** codes this will route seven digit calls, ten digit calls not starting with "1" and eleven digit calls starting with "1" to your PSTN line. It will also route calls starting with "011" to Google Voice on sp1.
You can also use **1 to force ten and eleven digit calls to GV should you wish.
I have very little knowledge regarding Google Voice, but I do not think it can pass on your CallerID from your PSTN Line.
Thanks for the reply and sorry for my late response.
I have done all what you said and seams that it is
almost working, there's only one little problem with the local calls. when we do a call most of the time we get the message "you must first dial 1 to complete this call"
but even if you dial 1 it keep saying it. you have to keep trying until the call works. And is annoying.
Regarding the international calls we are good and great on that part.
The other part is the incoming caller id. I don't have caller ID service in my landline, but will
obi shows caller id even if i dont have a caller id feature?. I don't have a Phone No. with GVoice , so every incoming call is on my landline.
i hope i was clear, English is not my primary language.
Merry Christmas.