Getting back to the tutorial nature of this most interesting thread, I want to add these interrelated points, that I often seem to forget and sometimes have to refer back to, as was the case this evening:
- Occurrences of (Mpli) and pli are substituted internally with the corresponding abbreviated trunk name of the selected primary line.
- You select the Primary Line for the PHONE port and for the AA, respectively, using the parameters PHONE Port::PrimaryLine and Auto Attendant::PrimaryLine.
The list below summarizes the choices available for selection as the primary line:
- SP1 Service
- SP2 Service
- SP3 Service
- SP4 Service
- OBiTALK Service
- PSTN Line1
- Trunk Group 1
Reference:
http://www.obihai.com/OBiAdminGuide.htm#_Toc333506039The possible choices for "named embedded digit maps" are:
o (Msp1) for SP1 Service::DigitMap
o (Msp2) for SP2 Service::DigitMap
o (Msp3) for SP3 Service::DigitMap
o (Msp4) for SP4 Service::DigitMap
o (Mpp) for OBiTALK Service::DigitMap
o (Mli) for LINE Port1::DigitMap
o (Mph) for PHONE Port::DigitMap
o (Mph2) for PHONE2 Port::DigitMap
o (Maa) for Auto Attendant::DigitMap
o (MtgN) for TrunkGroupN::DigitMap, N=1,2,3,4
o (MvgN) for VoiceGatewayN::DigitMap, N=1,2,3,4,5,6,7,8
Reference:
http://www.obihai.com/OBiAdminGuide.htm#_Toc333506161