For many years, I had my Obi110 running without issue in Australia. I've now relocated to Qatar, and I'm trying to get it working with the local fiber connection (Qtel), telco (Qtel), and GV.
After several attempts to re-configure my device with the Obitalk interface (settings would not push down), I ended up resetting and configuring, from scratch, through the device admin console. Given I'm not using VOIP, yet, this was fairly straightforward.
Calls are sent and received both thru the PSTN and GV. My issue, though, is that my GV call quality is horrific. Looking at a sample call status, my packet loss rate is at 50%. Direct pings to google look like this....
151 packets transmitted, 141 packets received, 6.6% packet loss
round-trip min/avg/max/stddev = 276.529/339.761/420.570/36.396 ms
It's fairly clear I'm dealing with line issues, but that's as far as I've made it. I'm running on just 1Mbps fiber, which could figure in, but then I'm guessing folks have success on less.
Are there any suggestions?