I'm trying to set-up an Obi 100 so that when you pick up the phone, it automatically dials a phone number.
I accessed the web interface. In the Phone Port area, I changed Digit Map to:
(<:60>)
What this should do is dial 60 as soon as I pick up the phone. However, when I pick up the phone, I get a fast busy signal (aka "Reorder") instead.
If I use the default digit map, I am able to dial extension 60 and it works just fine.
If I change the Digit map to a three digit number or longer, it works fine. In other words,
(<:800>)
works just fine. If I pick up the phone, the call is immediately routed to extension 800.
I contacted Obi support, but they have not responded. Does anyone have any suggestions?
FYI- My ITSP Digit Map supports two digit calling. Here's how it reads:
([2-9]11S0|1[2-9]xxxxxxxxxS0|011xx.S2|xx.S2|xS2|xxS2|*X.S2|(Mipd)|[^*#]@@.)