Same issue as before, but with new setup.
SP1- GoogleVoice
SP2- Callcentric
VG1- Localphone
Calls made via VG1 are routed correctly by the Obi, and RING THE OTHER END, but when the other end answers, there is no sound.. just a click, and the call disconnects.
CALL HISTORY
--------------
Call 1 09/15/2014 20:45:03
Terminal ID PHONE1 SP2
Peer Name
Peer Number **3XXXXXXXXXX
1XXXXXXXXXX@localphone.comDirection Outbound Outbound
20:45:03 New Call
20:45:13 Call Connected
20:45:17 End Call
XXXXXXXXXX represents the phone number I dialed from my PHONE PORT, and the number I was calling TO @localphone.com. I have {(<**3:>(Mvg1)):vg1} set in the PHONE Port settings to direct **3 calls to VG1.
VoiceServices -> Gateways and Trunk Groups -> AccessNumber is set to SP2(localphone.com)
Would it matter that the calls I wish to make using VG1 do not fit SP2's digitmap? Does that matter? It seems to me that the call is actually getting through, but for some reason it terminates the moment the receiving end picks up the call.
I'm at a loss. Thanks for the help!
Mike