Quote from: azrobert on November 02, 2014, 02:43:45 PM
I think the Bria softphone requires registration.
To allow registration on SP4 add the following to my previous instructions:
Voice Services -> SP4 Service -> X_Proxy: Checked
Edit:
I forgot something.
Voice Services -> SP4 Service -> AuthPassword : (Any PW)
The UserID and PW on Bria must match AuthUserName and AuthPassword
Thank you for all the great info! I'm making some progress, but still not there yet.
Bria X-Talk will verify the account, but any attempt to dial out results in an immediately "busy" sound.
Here's what I have in OBi:
Service Providers -> ITSP Profile D -> SIP -> ProxyServer : 127.0.0.1
Voice Services -> SP4 Service -> AuthUserName : (any userid)
Voice Services -> SP4 Service -> AuthPassword : (Any PW)
Voice Services -> SP4 Service -> X_RegisterEnable : (unchecked)
Voice Services -> SP4 Service -> X_ServProvProfile : D
Voice Services -> SP4 Service -> X_Proxy: Checked
Voice Services -> SP4 Service -> X_InboundCallRoute: {OBi200>(1xxxxxxxxxx|<1aaa>xxxxxxx|011xx.):sp1}
NOTE: aaa is my local area code for 7 digit dialing.
Here's the way I have Bria configured:
Account Settings > Account > Account name: OBi Talk
Account Settings > Account > Protocol: SIP
Account Settings > Account > Allow this account for Call: (checked)
Account Settings > Account > Allow this account for IM/Presence: (checked)
Account Settings > Account > User ID: (same as OBiTalk)
Account Settings > Account > Domain: 192.168.1.100
Account Settings > Account > Password: (same as OBiTalk)
Account Settings > Account > Register with domain and receive calls: (checked)
Account Settings > Account > Proxy: 192.168.1.100:5063
Account Settings > Account > Dial play: #1\a\a.T;match=1;prestrip=2;
Account Settings > Advanced > Reregister every: 30 seconds
Account Settings > Advanced > Minimum time: 10 seconds
Account Settings > Advanced > Maximum time: 60 seconds
Account Settings > Advanced > Enable session timers: (unchecked)
Account Settings > Advanced > Hold method: Handle hold requies in the M-line only (latest standard)
Account Settings > Advanced > Send SIP keep-alives: (unchecked)
Account Settings > Advanced > User rport: (checked)
Account Settings > Advanced > Send outgoing request directly to targer: (unchecked)
(NOTE: 192.168.1.100 is used to indicate my OBi 202's IP address.)
Everything else should be the default.
Any ideas on what I might be missing?
Thanks!