Hi, I have been looking and searching for the past few days to make my system work properly. I have read numerous threads by RonR and MichiganTel... and so many more about editing their OutBoundCallRoute and DigiMap but none of them have worked for me yet. So his is what I have:
Physical Interfaces > Phone > OutboundCallRoute{([1-9]x?*(Mpli)):pp},{(<#:>|[2-9]11):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Physical Interfaces > Line > DigiMap([2-9]xxxxxxxxx|1xxxxxxxxxx|<**8>011xx.)
Service Providers > ITSP Profile A General > DigiMap(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<**8>011xx.|xx.|(Mipd)|[^*]@@.)
I have the latest firmware update as well. So here's my setup for the Obihai 110, SP1 and primarily line is set to Google Voice. Line port is connected to my Vonage line, which I only use for incoming calls since Google Voice would not port Canadian numbers yet. What I would like to do is when I dial '011...' to make international calls, I want that to go through Vonage. Every other call can go through Google Voice.
I would also like to know if it would be possible to program the Obihai 110 so that when I dial 411, it automatically calls 1-800-BING-411 to avoid paying the 411 fees. Also, when I dial *123 on the phone, it uses Vonage so that I can check my voicemail on Vonage.
The one thing I did notice is when I have a new voicemail waiting on Vonage, I do not get the unique tone I would get which would indicate that I have new voicemail waiting. I also cannot switch to my second call when I have call waiting.
Currently I have Google Voice set as my primary line. As I am typing this up, I'm wondering if I should set Vonage as my primary line... but then how could I configure the OutBoundCallRoute so that every call I make other than when I dial *123 and/or 011, it uses Google Voice?
Please help because at this point my family is getting frustrated with this though I know with some proper guidance and help from the community, I can make this work. Any help is greatly appreciated and lots of thanks in advance. Also, I was wondering if I could actually set up Vonage as SP2 on Obihai because I could not find anything when I googled it.