I've been reconfiguring my OBi device to help my daughter with her move to using just an IP phone and abandoning her landline.
All has gone well in the initial phase. I got regular calls passing out to the service provider (Sipgate UK) and receive incoming calls OK.
However, I've been struggling with anything slightly out of the unusual. For example Sipgate has voice mail by dialing 50000. I can't seem to pass the number to Sipgate. Just silence. I can map 50000 to, for example 1571, and that passes through OK but 50000 just sits with silence for much longer than the 10 sec timeout. (1571 generates an error since that number isn't supported by Sipgate). Calls to the Sipgate test number 10000 also fail.
I've found lots of useful posts on Sipgate Digitmaps which I've borrowed from without success.
I'm fearful that even emergency calls (999/112) might not pass through.
Perhaps I should bin my trusty old OBi and get my daughter something else but if anyone can provide insight before I do then I'd be immensely grateful. The OBi configuration is very powerful but I'm clearly struggling to get things going.
I'm using SP1 for ALL calls. There is nothing connected to the PSTN. All calls including emergency calls should go through SP1. So the only code that needs to be captured is *** to access the voice menu via the attached phone.
ISTPA DigitMap:
(999S0|112S0|50000S0|0[1237]xxxxxxxxxS0|<01392>[2-9]xxxxxx|0[4568]xx.|00xx.|xx.)
Phone:
DigitMap:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|999|112|**0|***|#|**1(Msp1)|**2(Msp2)|**9(Mpp)|(Mpli))
OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}