I have had difficulty getting a post on this forum, so forgive any multiple and redundant posts. Until now I have been loosing my posts and attempts to send an internal e-mail.
A more detailed explanation of the trouble is below (The trouble described at the supplied link differs in terms of the trouble condition encountered at a OBI-100 ATA)
I am not able to reach an OBI-110 from two OBI-100 ATA's over the Obitalk network. From the OBI-100's, I reach a recording that states that the call will not go through, reads back the Obi-110 Obitalk device number called (**9 123 456 789) and ends the announcement with a 404 statement.
The failed call announcement appears to be not network based, but appears to be generated locally as a result of a call reject response from the Obitalk server.
The OBI-110 can dial out & reach each OBI-100 OK, and all ATA's can call complete calls to the echo test line **9 222 222 222 OK. Both OBI-100's can call each other over the Obitalk network OK.
All three ATA's are configured on SP-1 with a VoIP provider, and authenticate & call complete via the VoIP service providers network OK.
OBI-110 primary line is configured for SP1. A factory reset (Hard or soft Reset) ob the OBI-110 does not clear the trouble. Auto provisioning has been disabled on all OBI ATA's.
Thank you in advance