It feels like I've tried every combination of guidelines that I've found online.
Here's one:
https://www.obitalk.com/forum/index.php?topic=12492.0Here's another:
https://web.archive.org/web/20160317011451/http://www.obihai.com/docs/OBi-VoIP-Device-Attach-Legacy-IP-Phone-Workbook-v1-0.pdf
These conflict on some of the required settings, but I've tried both.
No matter what I do, I cannot get the SoundStation IP 7000 to call out.
The analog phone connected to the OBi200 was able to dial out successfully, so the Google Voice side of things seems like it's working, but I just can't get my conference IP phone (SoundStation) to have any success.
If I set only the Address/Authentication ID/Authentication Password and the Outbound Proxy in the LINE section of the SoundStation configuration, the phone boots, but trying to dial results in error beeps.
If I configure the Server1 Address/Port/Transport/etc. settings, the phone boots and says Line Unconfigured.
Both the phone and OBi are connected to the same network switch.
Phone Info:
Phone Model SoundStation IP 7000
Part Number 3111-40000-001 Rev:J
UC Software Version 4.0.14.0987
BootROM Software Version 5.0.1.10553
I'm hoping that this should be possible, especially since OBi and Polycom are now one. Can anyone clarify what I should be doing to get this to work. I don't even need the IP phone to receive calls; it just needs to dial out.