Quote from: seemeobi on August 10, 2015, 11:33:34 AM
I've searched through the forums and haven't found anything that has really worked for me or maybe I missed it so I apologize if the answer to this is posted elsewhere but any help would be greatly appreciated.
I have 3 lines (SP1, SP2, and SP3) on my OBi1032 and would like to assign different ringtones/patterns to each line. Is this possible? If so, what is the best way to go about setting this up?
Thanks for any help.
Hi:
It isn't obvious, by any means, so don't feel bad. Refer to the user guide, on page 58:
http://www.obihai.com/docs/OBi1000-IP-Phones-User-Guide.pdf?v=2Pick one of the "Bell" ring tones, not the default "Office" ringtone, because that ringtone's cadence can't be changed.
You would then need to log into the OBiTALK portal, and get into Expert mode. Then, go to the Voice Service, and select SP2 or SP3, as appropriate. Change "X_DefaultRing" to 2 or 3, accordingly, and be sure to save your settings. The phone should reboot in a minute or so.
I haven't tested this lately, so YMMV. Please let me know if this makes sense, and if it works.