Hi folks,
I would like to know if it's possible on an Obi110 to route the call based on the called number, which is also known as the callee number in the Obi Admin guide.
My set up is that I am based in the UK and I'm using two different UK numbers registered to one Sipgate basic UK account (using this account as the UK DID numbers are free). I'm currently forwarding all of these calls to my CallCentic account iNum number, as i'm getting a large number of scam calls on one of these DID numbers, the one that was ported from Talktalk, and I like to use the extensive call treatments available in CC. The other DID number receives no scam calls.
On my Obi 110 the inbound call route is set to:
{>245512345:SP1(883510001112345@sip.inum.net;ui=$1)}
where 245512345 is my Sipgate AuthUserName (using this Oleg method to thwart SIP scanners).
what I would like to do is route one of the DID numbers to a second CallCentric INum, which could have a different set of call treatments. Is this possible?
I'm confused because in the Obi admin guide the number after the ">" is referred to as the Called/Callee number, but in practice this seems to the the AuthUserName. Is there some syntax to use the Called/Callee number instead of the AuthUserName?
I am already 100% sure that the Called/Callee number is passed from Sipgate to the Obi110, because i've just made a call and looked at the Obi syslog, which shows in the SIP invite message:
From: "01234567890" <sip:01234567890@sipgate.co.uk>;tag=as05fc9999
To: <sip:
00441987654321@sipgate.co.uk>
Contact: <sip:01234567890@212.9.99.99:5060>
Call-ID:
457b1ecd787cc7be099abac225739999@sipgate.co.ukCSeq: 103 INVITE
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces
Content-Type: application/sdp
Content-Length: 437
This does include the Called/callee number which is
00441987654321The PSTN calling number is 01234567890
(some address anonymisation used)
I should add that in the Obi110 call history, both the Peer Name and the Peer Number appear as the PSTN calling number 01234567890. The Called/callee number is not shown.
I have also searched the forums and found this post, which was inconclusive:
http://www.obitalk.com/forum/index.php?topic=5449.0